DANGER....INSPECTION REQUIRED

[Sid Tuls]

Eric, if it's not to late I also would like a set. I will send you my info. Thanks

[hobobimmer]

Howdy all from beautiful East Tennessee.

I did better than I thought finding email addresses on the POG site.

Below is list of folks for whom I have snail mail addresses. Double Asterisk (**) indicates I have found your email address on POG site so DO NOT NEED TO SEND THAT TO ME. If no ** by your name, send me your email address please via Private Message on POG site. Thanks.

Eric Faires
Huntsville, TN

Richard Barnes** (GA)
Larry Beer (WA)
Robert Boies** (SC)
Buzz Browder (FL)
Bill Bunch** (SC)
Jim Chaloupka** (OH)
Tom Chilcote** (GA)
Tony Conder** (TX)
Ray Davis** (CA)
Gordon Deen** (TX)
Gary Deinhard (CA)
Ted DeLorme** (TX)
Andre Ducote** (FL)
Hector Duplichen** (TX)
Brian Esler** (WA)
Eric Faires (TN)
Dale Farley** (FL)
Patrick Fix (TX)
Rodger Hang** (AR)
Warren Holm** (CA)
Paul Horner** (FL)
Jim Keller** (FL)
Elliott McLeod (WA)
Greg Meiling** (OR)
Pete Petree (TX)
George Phillips** (IN)
Denny Robb** (OH)
Mike Simmons** (CA)
Kim Sloan (FL)
Dan Smith** (MS)
Michael Terry** (GA)
Granvil Tracy** (FL)
Sid Tuls** (CA)
Larry Walker (CO)
Jon Wehrenberg** (TN)
Ken Zittrer** (CA)


No snail mail addresses yet list.

Jim Shoen (?)
Vivian ______** (NJ)

[Jon Wehrenberg]

In case the seriousness of having the electric box come loose hasn't been well enough explained, I took a photo yesterday of the bottom of my electric box showing the electric posts. On the left is the ground post. The two posts to the right are 12V and 24V DC. If you look inside the box you will see these are fed by very large cables so the potential is significant.

Thank goodness the caps on my box are insulated and the caps did not fail when the box came loose. If the insulation on the posts had failed I would have had a dead short because the ground post and the 12V and 24V posts were all sitting on the air intake tube and the paint had worn to bare metal.

A short would have tripped the major chassis circuit breakers, and the result would have been a bus that suddenly stopped running. I cannot predict what other damage could have occurred, but can say sufficient current could have flowed to blow holes in the intake tube.

I am having some extra sets made so if you do want to be added to the list let Eric have your snail mail and email address. If anyone wants more details of what is involved let Eric have your email address and he can forward the installation instructions.

[hobobimmer]

Below is list of folks to whom I have sent, via email, the "Install Instructions" from Jon Wehrenberg.

Eric Faires
Huntsville, TN

This is the list of folks I emailed "Install Instructions" to earlier this evening. If you didn't get the email from me, send me a Private Message on POG and I'll resend. Better give me your email address again, too, if I messed it up the first time.

Richard Barnes** (GA) - SENT
Robert Boies** (SC) - SENT
Bill Bunch** (SC) - SENT
Jim Chaloupka** (OH) - SENT
Tom Chilcote** (GA) - SENT
Tony Conder** (TX) - SENT
Ray Davis** (CA) - SENT
Gordon Deen** (TX) - SENT
Ted DeLorme** (TX) - SENT
Andre Ducote** (FL) - SENT
Hector Duplichen** (TX) - SENT
Brian Esler** (WA) - SENT
Eric Faires (TN) - SENT
Dale Farley** (FL) - SENT
Rodger Hang** (AR) - SENT
Warren Holm** (CA) - SENT
Paul Horner** (FL) - SENT
Jim Keller** (FL) - SENT
Greg Meiling** (OR) - SENT
Pete Petree** (TX) - SENT
George Phillips** (IN) - SENT
Denny Robb** (OH) - SENT
Mike Simmons** (CA) - SENT
Dan Smith** (MS) - SENT
Gary Stevens** (TX) - SENT
Michael Terry** (GA) - SENT
Granvil Tracy** (FL) - SENT
Sid Tuls** (CA) - SENT
Larry Walker** (CO) - SENT
Jon Wehrenberg** (TN)
Ken Zittrer** (CA) - SENT
Vivian ______** (NJ) - SENT


No email addresses from these folks, so no instructions sent yet.

Larry Beer (WA)
Buzz Browder (FL)
Gary Deinhard (CA)
Patrick Fix (TX)
Elliott McLeod (WA)
Jim Shoen (?)
Kim Sloan (FL)

[Sid Tuls]

Hi Eric, thanks for sending the instructions. I couldn't open the attachment and was wondering if anybody else was having the same problem? Maybe it's me

[dale farley]

Sid,

I couldn't open it at first, because I don't have Microsoft Works on my computer. I just upgraded to Windows 7. I used Microsoft Word to open the file, and it worked fine.

[Sid Tuls]

Thanks Dale I'll e-mail it to my boys e-mail @ the ranch and have him try it. Thank-you

[Jon Wehrenberg]

If problems with opening the file exist perhaps I can send it to Jim Skiff and he can post it as an article. I would want it removed from the POG site within a short period of time because this is a one time offer and I wouldn't want new future members to get frustrated trying to get brackets that aren't going to be made again.

[hobobimmer]

If problems with opening the file exist perhaps I can send it to Jim Skiff and he can post it as an article. I would want it removed from the POG site within a short period of time because this is a one time offer and I wouldn't want new future members to get frustrated trying to get brackets that aren't going to be made again.

If anyone can not open it, just send me an email and we'll resend in another format. I've already done this for a number of people this morning after Deb showed me how. I'm happy to do it for others, too. Just respond on the email I sent you, and that will be my trigger to resend. Thanks.

Eric Faires

[Gary & Peggy Stevens]

If anyone can not open it, just send me an email and we'll resend in another format. I've already done this for a number of people this morning after Deb showed me how. I'm happy to do it for others, too. Just respond on the email I sent you, and that will be my trigger to resend. Thanks. Eric Faires

Thanks Eric and Debie for the additional work involved getting some of us the installation information. I recieved it and am able to reveiw it just fine.

Thanks again Jon, for you and your daughters work on this.

Now if I can only get this project done, without screwing something else up on the bus ?