Correct me if I'm wrong, but Prevost Car exlpained to me that the early slide equipped XL2's, up to 2005 and maybe some early 2005 units, have slides that are structural components of the chassis. These slides are the ones with the 3 locking pins on the sides. When the slide is closed the locking pins provide continuity of the internal chassis space frame. This is the reason that Prevost Car recommends against moving the coach when the slide is extended.
In 2005, Prevost went to a single pin at the bottom of the slide plus elliptical bracing in the basement. This style of slide is simply along for the ride. The weakness created by cutting a hole in the side of the bus is countered by the additional bracing in the basement.
According to Prevost Car, the structural slide may squeak as the chassis flexes. The flex causes movement of the locking pins relative to the slide body. Some sort of lube, graphite, on the pins is a suggestion that I've heard from others on this forum.
Does this fit with your understanding of the slide technology?
David Brady
'02 Wanderlodge LXi,
Asheville, NC


Reply With Quote