Quote Originally Posted by Mark3101 View Post
I will make a call to Prevost and ask some questions. I am confused as to why it only get an error while opening and not closing.
The sequence for opening is as follows: When you push the button to open:
1. The air seal begins to deflate
2.once deflated, the pins retract from the slide
3. the slide motor begins to move the slide out
4 once out, the slide seal inflates

This sequence is reversed when closing

So, if your error light begins at the beginning of this process , it is an air issue, possibly not enough air pressure in the system to begin the sequence.
If you get an error light later in the sequence, it might indicate too much current draw on the motor which indicates the motor is working too hard.