
Originally Posted by
Loc
Mark,
I had an issue with a rattle in my front slide. It had nothing to do with the slide mechanism, but the trim that the converter put around the slide. It was a very simple fix (double stick tape) once I found where the rattle was. It took me a little time to locate the rattle because it was intermittant. I had to get someone else to drive the bus while I listened to find the rattle. I could even tell that there had been some type of double stick tape or felt pad in the location before (which is why it didn't rattle when I first got the bus). In your case it could be the slide mechanism, but it just as likely be the trim.
Good luck!