-
Ok Gil, Good post and glad you confirmed my theory. I tried your sugestion and you were correct in the main pump came on and worked just fine. So started working back to see why pump circuit H14 was not getting power. I have power coming out of the Webesto controller on Yellow and green H19 & H34 which goes back to the ECC - Since the ecc is sending power back out for the interior circuit I believe this part of the circuit is all good. This is where I get lost. Is the relay for the pump circuits on the board or one of the lower stand alone relays at the bottom right of the cabinet? I checked all fuses on the board and along the bottum of the cabinet and all are good? I noticed you are in Beaverly Hills Florida, I am over at the Florida Grand in Webster.
Thanks, Papa Jo
Last edited by Papa Jo; 02-21-2015 at 06:12 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules