Level Low Question

[Joe Camper]

Even U guys and girls with automatic leveling. Want max performance? Say U r at a spot the front needs up. Get the compressor to cycle on or better yet right as U pull in and stop its usually working at this point. Set the brakes turn on the high idle but watch the air pressures and turn off high idle when U get to 100+psi before turning on the auto level. If U don't what will happen is it will get to pressure and cut off often before the leveling is finished and if its not done yet and U r on a slope done in front it may or may not make it. Try it U will like it. In either event the system will preform better.