Slide Seal

[merle&louise]

David,

I will try to explain how the "one size fits all" seal works. The seal is cut to size and then the splice kit is used.
1. Glue the opening in the end of the seal with super glue.
2. Fold it over once
3. Put the folded seal end in between the bolt and the clamps.
4. Tighten down the bolt which will tighten the clamps around the seal end.
That's it - simple!

Jon,

I can't explain how the one piece seal works around the corners; it just does! The corners of my slideroom are rounded and the seal just seats up to it. The advantage here is that it is one piece of rubber seal; no seams.

Newell has made a few sliderooms that are S shaped at the bottom right hand corner. I don't know if those have the "one size fits all" seal or not. These sliderooms are really weird looking; but they work.

I would be glad to show you mine at POG 10. I can see daylight from the inside of my coach when the seal is deflated; but no daylight is visible when the seal is inflated.