Chuck,

I'm only 1 year difference than yours. Your 110 volt panel is the one in your galley that has all the breakers and switches. There is a breaker for inverter number 1 and 2. Assuming the breaker isn't tripped and you don't know how to reset the inverters, you can unplug from shore power, shut gen off and throw the inverter master switch that is in the 2nd bay drivers side with your inverters and that will shut off all battery power to the inverters. Then plug in the shore power, turn the master back on and see if that brings your dead inverter back to life.

You will not get 110 v power back to the circuit for your fridge, outlets or other sources on that leg without the inverter. It flows through and without a by-pass switch, you will be without power.

I don't have Heart inverters, so I can't tell you how to reset them without removing all power as I suggested above. It should be a simple matter of turning the inverters off and then back on with the remotes or manually at the inverters.

By the way, there is no way to get to the power supply for your fridge without removing it. There is a way to rig up an alternate power source that I can help you with after you get through your present problem, but it involves a one time removal of the fridge.