Gary,
I have Trace Inverters and occasionally one will get stuck on (bulk) charge and I have to reset the inverter at the remote to get it to float.

Since we're on inverters, no thread creeping here, there is an excellant article on the other site about adjusting the bulk charge time. I have been doing this since I bought the bus and it works great. When on generator for dry camping, I use 2 hrs for bulk charging and then change the settings to 20 minutes when plugging in, since the batteries are full after driving. If I have to plug into 30 amp, I cancel the bulk charge all together in order to have enough amps to power the necessities.