I like to keep things in working order, as much as I can, and well I like to try and fix small things.

Nothing real complicated, ya know, just little things like replacing 2 light bulbs in a 3 light fixture over my dinette. I really need the extra light to be able to see what I am eating...

Well I started on this repair over a month ago Changed the good light bulb to the other two sockets, but they didn't work, so took the lamp to a repair facility and he promptly replaced all the sockets with new, and tested it there by plugging into 120v source... Worked Great.

Put fixture up in the bus and no workie ! Crap Tested the wires coming in on my AC handy dandy tester, and no power. Checked the fuses, all good, checked the on/off switch, good too.

Called Panterra Coach to ask them what the H*** am I doing wrong and what do I check next?

They said did you put 12v bulbs into the lamp? 12v bulbs, it is a 120v fixture that was tested and worked perfectly in the shop, why would I put 12v bulbs in it....?

Cause that is the power coming to the light fixture... WHO WOULD HAVE THUNK Works great now !

Gary S.