Air Bag Bench Test: how do I do that?

[Joe Cannarozzi]

Sure you could. Watch how much pressure you put in it. Carrying a load under the bus they are around 60 or 70psi but I would not go nowhere near that bench testing without that jig.

I thought the jig would duplicate the actuall configuration better. Sometimes what is leaking at 60psi will not leak at 30.

I would be concerned what may happen at the bottom where the bag attaches to that base if allowed to just stretch out but I may be worrying about nothing.

If you have one of the old ones experiment on one of those first.