Results 1 to 10 of 10

Thread: 32 Degrees... Webasto on the blink.

  1. #1
    ajhaig Guest

    Default 32 Degrees... Webasto on the blink.

    We stayed at Fishing Bridge in Yellowstone for several days. Old Man Winter paid an early visit and our Webasto failed. It fires and runs for about 10 min. then shuts down. Things got pretty chilly with only one 110 heater (only 30 amp. service).

    We are now at the Virginian RV Resort in Jackson, WY, and will be heading to Seattle in a few days... Where can I go to get the Webasto repaired or is there anything I can do to get it working?

    We made the mistake of going over the Power River Pass on our way to Yellowstone, 22 miles of 7% grade - 9700 feet. Today we crossed the Continental Divide 5 times in the bus. I think I've had my fill of mountains for awhile. Many thanks for all the great input regarding getting up and down these mountains!
    Attached Images Attached Images

  2. #2
    Join Date
    Jan 2006
    Location
    Alexandria
    Posts
    2,161

    Default

    AJ,

    Read my primer on Webasto, The Good, Bad and the Ugly, over at Prevoman.

    http://www.prevoman.com/Pages/Webasto/Webapage1.html

    I'll be up until 11pm EST so call me tonight. Got to get my beauty sleep so that I look good for Trukman at POG IV.

    Thanks

    MIke

    703.362.3539 cell

  3. #3
    dalej Guest

    Default

    AJ, first thing that come to mind is the circulation pump(s). If the Wabasto starts, runs through the cycle and then shuts down, it seems that it operational. If the circulation pump is not working, it can't keep the the hot water away from the sensor.

  4. #4
    Join Date
    Jan 2006
    Location
    Nichols Hills
    Posts
    2,465

    Default

    There is a mechanic in Idaho Falls that the guy at the Virginian turned me on to last year who's name I can't remember. There are a few RV folks around town, but the Webasto is not that common.

    I would go thru Mike's commentary on the prevostman site and see if you can fix it yourself.

  5. #5
    Petervs Guest

    Default

    If you are still trying to get it working, and you happen to pass by here in Battle Ground, WA (just north of Portland OR) on the way to Seattle, I can offer you a place to park for a while ( with hookups) and my tools and assistance in repairing or finding parts or professional help.

    Down here at sea level the Webasto is not yet necessary.

    Feel free to call me if you like. 360-901-7611

  6. #6
    Join Date
    Nov 2006
    Location
    Concord, Ohio
    Posts
    285

    Default

    Check all of your outside faucets and make sure they are closed. If one is open, say the outside sprayer is on, you will have porblems with the Webasto/Aqua Hot.
    John
    John Knollmaier
    Still Dreaming!

  7. #7
    ajhaig Guest

    Default

    Peter,

    I'd like to take you up on your offer. We will be in your area for a while as we have family in Seattle and Portland. We'll keep these two characters under control...

    I'll give you a call.

    Andrew
    Attached Images Attached Images

  8. #8
    Join Date
    Jan 2006
    Location
    anytown
    Posts
    8,908

    Default

    AJ,

    There are two things you can do immediately. Swing open the head and using a Q tip and some alcohol clean the photo cell. If the controls do not "see" flame the fuel delivery will be shut off.

    As was suggested earlier verify the circulating pump is working when the Webasto is turned on. The burner stops at around 160 degrees. If the pump is not circulating coolant the water jacket will hit 160 degrees fairly quickly and that will shut down the burner.

    There is not much to the Webasto so with Peter's help you should develop an understanding of it and also learn how to maintain it.

  9. #9
    Join Date
    Nov 2006
    Location
    Wilsonville, OR 97070
    Posts
    852

    Default

    Check with the boat yards in Seattle or Portland especially Seattle. There is a major Webasto dealer there for the boat people.
    GregM

  10. #10
    Join Date
    Nov 2006
    Location
    Wilsonville, OR 97070
    Posts
    852

    Default

    Also Dick Wright of WRICO has the test box for Webastos that plugs in to the control box terminals. Dick is in Eugene, OR just off I-5 south of Eugene. You can also get the wiring schematic off the Webasto website and apply 12v DC to the terminals and you should get a response from the different conpoenets.
    GregM

Similar Threads

  1. Webasto relays
    By gmcbuffalo in forum Electronic Gizmos, Computers and Communications
    Replies: 8
    Last Post: 01-11-2010, 11:22 PM
  2. Webasto
    By JIM CHALOUPKA in forum Busted Knuckles and Greasy Jeans
    Replies: 13
    Last Post: 01-12-2009, 10:56 PM
  3. Webasto
    By adamdegraff in forum Busted Knuckles and Greasy Jeans
    Replies: 10
    Last Post: 11-17-2008, 08:15 PM
  4. #&%/^@$ Webasto
    By flyu2there in forum Busted Knuckles and Greasy Jeans
    Replies: 31
    Last Post: 03-14-2008, 12:07 AM
  5. Webasto Help
    By Jim_Scoggins in forum WHERE TO FIND STUFF: Links and Resources
    Replies: 13
    Last Post: 12-15-2007, 07:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •