Quote Originally Posted by dalej View Post
Jon, that would help since I can't read the info on the seal. I have them out on the tag and was going to take it in tomorrow morning. They might be able to measure it.

Is the seal for the sight gauge cap easy to get?

I'm waiting to do the drive axle after the tag, just thought it would be better.
Dale, the part numbers on C/R seals are found on the oil side of the seal - nearest the bearings. You should be able to determine what you are using from the inner/outer bearing numbers too. You can buy new 6 bolt Stemco type caps with a gasket and bolts for about $6.50. It's more trouble than it's worth to try to change the window in those caps.