Here’s preliminary view of the plumbing for my recirculating shower, the bus originally came with a grey water shower dump valve.



The way it was originally designed is that the pumping connection at the top routes the grey water into the downward pipe, when the valve is closed the water backs up and then goes through the water trap and into my grey/black water tank.

In my case I replaced the manual valve with a sediment filter and electrically driven valve that is normally closed.



The rest of the system consists of:

1. Dual backflow check valve
2. Electrically driven auto closing three-way valve (normal shower when not activated)
3. Heat exchanger for hot water (kind of hidden in this picture)
4. RV style water pump
5. Dual filters
6. UV sterilizer



Plumbing is done, now onto the electrical portion. Initially I will just use a five gallon bucket as the recirculation tank that you see in the second picture. Will custom build something else later.

The valve above the initial sediment filter gives access to fresh water to prime the recirculating system.