Just now getting around to documenting the TV lift that I used in my bus.

I purchased it off of Amazon at the following link:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1



I first used this with my 75 inch TV (hey go big or go home...).



However even I had to admit that it was too big in the bus, plus it weighted a lot and I was going to have to add a significant amount of bracing.

I had been wandering around Costco and noticed that there was a 55 inch OLED TV at a decent price and when you look at the screen portion it is only about 1/4 inch thick on top. The bottom is thicker as that's where electronics are. But hey it's a much lighter unit and you don't need two people to mount it or move it around.

Here's a side view of the TV.



And a image of the screen:



The above picture doesn't display the clarity that I get from this LG OLED TV, it also has an AI mode for the video and audio that does real well upscaling the video's that you get over a cellular data connection.

The lift is totally silent and had no problem with the the 75 inch TV which as I mentioned took two guys to move.

It's current position is based on centering the 75 inch TV, so I will be moving it to the left and closer to the wall. I will also adjust the mount so it will have a travel position when dropped down to the floor to rest on padding. Also in the dropped position it doesn't obstruct the windows.

I will also be creating a drop down desk in front of it, so it will be totally hidden unless in the raised position.