Quote Originally Posted by Gil_J View Post
I've never seen anyone use the generator coolant loop for their domestic hot water. I would discourage the thought. If the generator is running you have AC power. Use the electric heating elements. The complexity and risk seem far too great for the very limited value of using the generator's coolant loop.
Well I already have the second water heater that can handle the coolant flow which is about four feet away. Secondary use in my design is preheating the generator before starting.

The bus has an old 12.5 KW Koler generator with a Perkins diesel engine with a remote radiator in the rear of the bus. The Perkins engines are used a lot on small sailboats for auxiliary propulsion .

The idea is that when I do have to run the generator is to get maximum utilization for the shortest run period, so more and likely will load it up to do:

1. Coolant heat recovery
2. Electric heat to hydronic storage
3. Aux heat out of the air conditioner units
4. Top off the house battery storage.

But hey I don't need it right now, so it will be something I do further down the road.