-
Thanks for all of the help so far - it appears the problem is a blown fuse - one of the fuses is only showing voltage on one side when everything is shut down and running on inverters only. (Batteries are all fine - I have 6 Lifeline AGM's that are less than 2 years old)
Next issue:
The Bluebird plant cut some corners on the electrical when they built all of the units and wrapped the fuses in electrical tape and clamped them in place rather than using a fuse holder. I would like to redo them with proper fuse holders, but don't have the tools/expertise to make the new cables I would need to reposition and insert new fuse holders.
I asked on the Wanderlodge forum, but most of those guys are big into DIY - so they had no suggestions of a shop to do the work (other than one in FL).
So, any suggestions on who would be competent to do this kind of work and located somewhere on a line from So Cal to Dallas, TX? I had a great deal of non-electrical work done at Prevost Fort Worth in Jan of this year and was very pleased - could they handle this?
Here are a couple of photos of a '95 Wanderlodge with a similar wiring setup to mine. The first photo shows the original setup, the second after the fuse holders have been installed.
'95 Electrical Be
.jpg
'95 Electrical Af.jpg
Thanks for all of the help so far.
BTW although I'm not setup to handle this repair/upgrade, I am an authorized AquaHot / Webasto mobile service center. If you ever need AquaHot / Webasto parts or service, let me know. (I offer a special discount to fellow POGgers.)
Bruce
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules