Jon,

After looking real close at my panel, it doesn't have the same style bracket as yours. Mine has a steel lip (flat channel) on the two sides and bottom that seems to be be part of the box and is screwed to the bulkhead. It doesn't appear to be a bracket. The box has been tack welded to the bulkhead at the top.

What am I missing? Could mine be better than yours....


IMG_3129_1.JPG
Right side

IMG_3130_1.JPG
Box is tack welded in the dark area below the obvious two spot welds

IMG_3132_1.JPG
Left bottom side