Howdy all.

I have Yanmar Generator, which I believe to be Engine Model 3TN82TE-G1.

I removed both Primary and Secondary Fuel Filters to take to NAPA to match up. Secondary Fuel Filter says WIX 33263, so ordered that as NAPA 3263 (NAPA said WIX makes their filters, so just drop first WIX number and that is NAPA part - that's probably common knowledge to all but me, and hopefully true).

Primary Fuel Filter has no visible numbers, so I left NAPA with no replacement for that yet.

The housing for the Primary Fuel Filter is brass colored on my generator, and says Racor 110 on the housing. I looked for Racor 110 on internet and found one site saying 110 was replaced by 110A, but the dimensions don't look close.

My dimensions on the filter are Inside Diameter .75", OD = 2.25", and Ht. = 2.5".

NAPA had a Yanmar Engine Cross Reference for my engine model, being NAPA 3507, but it was ID = .79", OD = 1.969, and Ht. = 3.5", which is way taller than my Racor housing.

Anybody know which filter number I should use, or do I need to provide more info? Thanks all.

eric faires
huntsville, TN