-
need to replace dash monitor- need help
My Rosen monitor in the Marathon is going out. I bought a new monitor but the original Rosen was modified with connections from the "screen"
button to the old monitor- maybe up down buttons.anyone know how to modify so the tank levels, voltage etc can be displayed?
-
John,
Doesn't the screens button toggle with each push of the button to the next TechLink screen?
Gil and Durlene
2003 H-3 Hoffman Conversion
-
yes it does but somehow that button is wired to the display that is not a stock display. four wires go to the display connecting at the pads for up, down, and I forget the other two. Also want to replace the old computer with the floppy drive. Understand Marathon has developed a rasberry pi to run that system. wonder if anyone on the board has replaced the old computer/how have they done that.
-
John,
Call Marathon and ask for that drawing. They will usually send out a drawing or 2 for the older coaches.
Many of the rear view camera systems have the following. 2 wire video or mini coax, power, ground, reverse image, up, down, left, right, and air blower.
From the switch to the monitor I can't image more than video and possibly power to trigger the monitor to switch.
Gil and Durlene
2003 H-3 Hoffman Conversion
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules