Results 1 to 4 of 4

Thread: 24v LED T10 wedge base greater than 100 lumens

  1. #1

    Default 24v LED T10 wedge base greater than 100 lumens

    Question for the brain trust. I am hunting a 24v LED T10 wedge base lamp greater than 150 lumens that must be smaller than 3/4 diameter. I have searched a good part of the day for this elusive lamp and reaching out to see if any of you have a wonderful source to refer me too. References appreciated.
    Tony and Jenny Conder
    Abilene, Texas
    - - - - - - - - - - -
    2008 Marathon D/S XLII
    2017 RAM 1500 4x4

  2. #2
    Join Date
    May 2012
    Location
    Beverly Hills
    Posts
    4,652

    Default

    Tony,

    As an alternative, unless the tube is not behind a diffused cover, would be to install LED strip lights in the housing. You could also change them to 12V. Worse case would be to add a relay at the Allen-Bradley system. Best case would be to just change the A-B input to that circuit to 12V.


    Gil and Durlene
    2003 H-3 Hoffman Conversion

  3. #3

    Default

    Thanks Gil, those are definitely options for someone going through this same process. I was fortunate to find a lamp that would work at marinebeam.com . It was somewhat elusive, and more expensive that I hoped but it will be a huge upgrade from my current lighting. See you soon. Tony
    Tony and Jenny Conder
    Abilene, Texas
    - - - - - - - - - - -
    2008 Marathon D/S XLII
    2017 RAM 1500 4x4

  4. #4
    Join Date
    May 2012
    Location
    Beverly Hills
    Posts
    4,652

    Default

    Tony,

    It's always rewarding to find that elusive part!

    See ya next month,


    Gil and Durlene
    2003 H-3 Hoffman Conversion

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •