Results 1 to 6 of 6

Thread: Back Up Camera Does Not Work

  1. #1
    Join Date
    Jan 2014
    Location
    Monroe
    Posts
    5

    Default Back Up Camera Does Not Work

    Wheneve I turn it on it comes back with a message "No Signal" any idea what is causing this ?


    Rob

  2. #2
    Join Date
    Apr 2010
    Location
    Clearwater
    Posts
    231

    Default

    Two possible sources of failure for this are:
    1) Bad camera or blown fuse for camera power causing no video to monitor
    2) Bad video switcher that selects between the backup camera video or navigation video to the monitor.

    Of course, a loose or corroded connection(s) is/are also possibilities that cannot be ruled out without checking.
    Ben Cummings
    U.S.A. Luxury Coaches, LLC
    Clearwater, FL

  3. #3
    Join Date
    Jan 2014
    Location
    Monroe
    Posts
    5

    Default

    Thanks Ben

  4. #4
    Join Date
    Jan 2014
    Location
    Monroe
    Posts
    5

    Default

    Where can I locate this fuse?

  5. #5
    Join Date
    Nov 2006
    Location
    Huntsville
    Posts
    3,135

    Default

    Robert,

    The fuse may in-line, close to the camera. I have a breaker in my breaker panel for my camera, but you may or may not have one. It may be specific to your particular Featherlite conversion.
    Last edited by dale farley; 06-23-2014 at 08:44 PM.
    Dale & Paulette

    "God Loves you and has a plan for your life!

  6. #6
    Join Date
    Feb 2006
    Location
    Bristol, Tn
    Posts
    1,647

    Default

    Don't want this to come out the wrong way,---- make sure the camera is turned on. Been there and done that.
    Roger that!
    2008 Liberty DS XL2
    2023 Denali Ultimate
    My 6th Prevost

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •