Aisle lights stopped working

[cthalfman]

Ron, I have had one other member PM me on the grab bars. He is getting back with me today if they are going to work for him. If he does not take them I will let you know. Yes, they include the mounting brackets. Within the center of the bar mount are tabs for the 12V light connection.

[cthalfman]

OK finally got around to looking at the aisle light connections for the old grab bars. They did not complete a circuit. All four positive and and four negatives paralleled off the main wires feeding the stair rope lights. I have removed them all. The circuit continues into the stair rope lights as before. The aisle lights still do not work. The panel lights for the aisle light control remain green all the time regardless of the position they are in or where they are pressed (front passenger panel or bedroom panel). Any thoughts here? Maybe a fuse? Does anybody with a CC electric diagram know which card controls the aisle lights?

[Gil_J]

Chris,

I'll try to get over to my coach today and identify which card in the ECC controls the aisle lights. Hopefully, it's just a fuse in the ECC.

[cthalfman]

Thanks Gil. That is what I am hoping. Nick's post makes reference to a solid green indicating an open circuit or a blown fuse. I don't think the circuit is open so hoping it is the fuse.

http://forum.prevostownersgroup.com/...een+light+fuse

[cthalfman]

Found it. 5th board, 2nd 20 amp fuse from the top of the board.