These switches are on my Country Coach panel. They are yellow when OFF and change to green when ON.
Nice, at a glance you can see nearly every device throughout the coach that is on or off.
Problem is my FOG LIGHT switch "pictured" stays green all the time. The lights toggle on and off when this button is pressed, but
the color never changes. Makes you think the fog lights are on when they are not.
Then once you press it a few times you lose track and have to send the queen outside to tell you what you got,
unless its dark outside.
Anyone know how to remove, repair, replace one of these?
OK, I'm thinking.......If the Fog lights are activated by the switch, the wires are intact because the latch is flipped and the lights come on. Therefore, everything from the base of the switch must be good. Have you tried pulling the bulb portion of the switch out and swapping it with a Curb Light switch ?
Jim leading you down the right path. There are 2 LEDs in those covers, one red and one green. The green one obviously works. When those switches are of both red and green should be on; that's why they appear yellow. It's likely the contacts between the switch cover and the switch needing cleaning. As Jim said, replace it with a known good. If that works you likely have an unused switch you can swap the cover for.
Ok, I pulled the cover, heres whats inside ( photos below). There were several blanks unused so I swapped it out, problem solved.
No ID info on the part, but I expect sooner or later we are gonna need some spares. So, if you come across where to get these please
let me know too. I see a lot of these on various machines, maybe a common name, but I don't know it.
Joe, you said $5 , where?