If you have to tackle your ride height valves for adjustment or even replacement, one easy way to access them is by removing the curb lights. I also made a measurement rod with a hash mark set at 11.5" instead of trying to hold a tape measure between the upper and lower bag mounts. For an easy method of adjustment, just mark the shock with a marker that shows the correct ride height. Now that my ride height is correct, I made note of the body height just in front of the drive wheels for a quick check anytime I suspect there is a change.

Mango covered this years ago, but I thought a reminder might help.

IMG_4521_1.jpg

IMG_4522_1.jpg

IMG_4523_1.jpg