This past Qctober I had a three axle alignment, tie rod and steering rod ends R&R at Prevost Nashville. The process required the front wheels to be removed and re installed. The mechanic/technician asked me do I want my lug nuts tightened with a torque wrench or would an impact wrench be OK? Needles to say, I was impressed. I said "torque wrench of course". He even new the sequence of tightening!!

Other work was performed in a similar manner. I will go back for work I am unable to perform myself.

Words to ponder about the X-12, If you are feeling challenged physically, the tool is heavy in it's own right and one becomes easily fatigued just holding the tool in position and moving it from one nut to the other. This is especially true when removing and installing all wheels successively.

JIM

JIM