-
Headhunter Toilet Problem
I have been experiencing toilet issues. I have replaced the solenoid. I have replaced the valve. That did not correct my issue. The toilet flushes non stop and will not cut off. I southern engineered the system with a manual switch that works like a champ. I ordered a new "timer" shown on this post, but the "timer" has more wires than my old "timer". The old timer had a positive, negative, and two wires that ran to the switch. The new timer has a positive, negative, two wires marked solonoid, and two wires marked switch. Not being an electrician and having no instructions, I have no idea what to connect to what in order to make this work like it is supposed to. I would be much appreciative for any guidance and feedback.
Thanks
Dazed and Confused
Headhunter timer.jpg
Tony and Jenny Conder
Abilene, Texas
- - - - - - - - - - -
2008 Marathon D/S XLII
2017 RAM 1500 4x4
-
Dear Dazed and Confused:
I think you solved the problem. Leave the manual switch in place.
Signed,
Abby
-
Headhunter changed the design around 2008 or 2009 you need the old switch which they still make.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules