Bus Stands 2010

[lloyd&pamela]

Jon I missed out on the braces for the box over the engine, if you are taking orders for other fabrications. I will take a set of those for an XL also. Thanks.

[gmcbuffalo]

I know with the air bag problems of raising the coach I have had a problem getting the XL set I have under the front. I have to use a jack for the each 1/2 inch my coach with not raise up to. Outside of that they are a must to have. Very nicely made.
Greg

[Alan__]

I am in for a set for a XLII. Already wired Di the funds.

[Jon Wehrenberg]

Ted,

Your stands should work on the current bus. Hang on to them.

[James]

So the count currently stands at:

1 Set - Ken & Gwen Brewer – H3
1 Set – Lloyd & Pamela Segger – XL
1 Set – Paul & Janice Horner – XLV
1 Set – Gordon & Jennifer Deen - XL
1 Set – Larry & Teddy Beer – XLV
1 Set – Darrell & Linda – XL
1 Set – Ted & Jan Delorme – XLV
1 Set – Mark & MK Hann – XLVII
2 Sets – James & Kris - XLVII

So far that's a total of 10 sets.

[tdelorme]

Ted,

Your stands should work on the current bus. Hang on to them.

Thanks, Jon. I'll hold on to them.

[James]

Thanks, Jon. I'll hold on to them.

Ted,

Does that mean you're off the list?

[MangoMike]

Jon,

I think I was the only guy to get H3 stands the last time around. And I think my rear ones are a little short, so I would have Ken remeasure his H3 and give you new dimensions before manufacturing.

Mike

[HarborBus]

Jon I missed out on the braces for the box over the engine, if you are taking orders for other fabrications. I will take a set of those for an XL also. Thanks.

Lloyd, when Jon sent my set there was confusion on my mailing address so I ended up with two sets. Let me know your address and I'll send a set to you.

[mike kerley]

Jon, I missed the first round but would like to get in on this production run. Please put me down for a set for an XL. If not at the Texas rally, we'll make other arrangements. Our summer travels are limited.

Thanks for doing this, again.