Re: KVH Software

[Alek&Lucia]

Hi,

I need KVH dealer programing software. Anybody have a copy of one ?
I have KVH R5 in motion with Dish Network, and somehow on the way back from OKC when I started my antenna everything went to default setting: Direct TV. By KVH recommendations we upgraded 2 boards with newest software, and also installed new Data cable. Now the strange thing is that everything is working OK when the DISH Network receiver and the KVH dish is connected by extension cord in my shop bypassing the bus totally. The second I connect both in the bus I'm loosing everything and the Dish will not lock to any satellite.
Any idea what is going on ?

Alek

[Coloradobus]

Alek,

Do you have one of the switching boxes that determines where your signal comes from? That maybe bad or a connection is loose. Just a thought. Those switch boxes are inexpensive at Radio Shack.

[Alek&Lucia]

No switching boxes.
When everything is connected in the bus the KVH dish is just constantly looking for a Sat. and not locking to anything

[stevet903]

When you say connected in the bus, do you mean to the AC power?

[Alek&Lucia]

Yes.
BTW: The Dish is also connected to AC/DC power adapter, not 12V coach.

[truk4u]

Alek,

Is it possible your system does not like inverter power?

[jelmore]

Alek, when you say connected by extension cord and it works, do you mean connected with coax from RF1 on the R5 to your receiver out of the bus? And then when you reconnect the bus coax to RF1 and reconnect the receiver to that cable, the dish no longer works? Seems that would point only to that piece of bus coax. These systems don't like splices or splitters, so if there is something like that in the bus coax cable, that may be the trouble spot. Maybe it came loose. Do you have continuity from one end to the other on the bus coax?

[GDeen]

Ok, I have the R6 and have what sounds like a similar problem. Has been working fine until last week. Now the antenna whirrs and whirrs and just doesn't lock on it seems. Initially I thought it was Direct TV's box and had them out yesterday. The tv would show starting to download data and then just quit. Turns out, no signal coming in from antenna.

The Direct hand and I check through all connections - he said splices can be bad. None were found. Got on the roof and checked the coax inlet to the antenna and it was good with good contact.

I called KVH tech service just now and of course they want a serial number to offer me the latest and greatest upgrade. I asked the hand what would normally be the problem, and he said it was dependent on the serial number and where it fell in their product development. When pressed, he said the rotary joint or slip ring could get corroded and prevent the antenna from fully rotating.

Any updates on your situation Alek? Any other ideas?

[Alek&Lucia]

Gordon,

After KVH upgraded 2 boards with newest software, they did not send the A and B Keys with it.
They overnighted them, and it is working now.

The dish is working well now, and we are very happy !

Alek

[GDeen]

Follow up: last night pulled the dome off the dish, pulled the metal plate off the housing and checked and confirmed all connections. Did not see anything obviously loose, but applied connecting pressure to all. Put it back together, backed the coach outside and re-booted KVH receiver. Colts on NFL network suddenly so it seems something was loose.

Thanks for the suggestion to check the metal box out AJ!