Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 53

Thread: Cool Tools

  1. #31
    Join Date
    May 2012
    Location
    Beverly Hills
    Posts
    4,652

    Default

    Joe, you're always thinking. Great idea. I'm surprised you don't carry a vise mount to a standard hitch insert.


    Gil and Durlene
    2003 H-3 Hoffman Conversion

  2. #32
    Join Date
    Mar 2013
    Location
    Chicago
    Posts
    3,988

    Default

    I'm not going to buy a new one and I haven't found just the right vintage Vise I want to use yet and I kind of like the one I'm working with now.

    Where's all the Cool Tools what's the matter with you guys am I the only one posting here come on.
    1990 Peterbuilt 377
    3406 B Caterpillar
    13 Speed Roadranger
    No Norgrens


    1 day on paper no machines

  3. #33
    Join Date
    Mar 2013
    Location
    Chicago
    Posts
    3,988

    Default

    20190727_131549.jpg

    20190727_131935.jpg

    20190727_131752.jpg

    20190727_131836.jpg

    It's nice to have close friends with lots of tools. So I'm out to breakfast mentioned to Frankie that I'm going to have to break down and rent a MAG drill because I have to drill some holes in the frame and I haven't the money to buy one right now and he tells me, I bought the one from Johnson truck body when they had their going out of business auction follow me to the garage after breakfast I'll give it to you.

    I've never used one like this it's a right angle and it doesn't use bits it uses cutters like a mill. They call them anular bits. You still have to strap it down in case somebody pulls the cord out of the wall or the power goes out and if you don't you can still pretty easily overcome the magnet cutting big holes.

    However, these Cutters are way better than drill bits I'll never use a drill bit on a frame again once you get this thing started it takes very little effort to get on down through. Made in America and more than just cool.
    Last edited by Joe Camper; 09-08-2019 at 11:32 AM.
    1990 Peterbuilt 377
    3406 B Caterpillar
    13 Speed Roadranger
    No Norgrens


    1 day on paper no machines

  4. #34
    Join Date
    May 2012
    Location
    Beverly Hills
    Posts
    4,652

    Default

    I can't say I've ever seen one of those. Very cool.


    Gil and Durlene
    2003 H-3 Hoffman Conversion

  5. #35
    Join Date
    Mar 2013
    Location
    Chicago
    Posts
    3,988

    Default

    Tire Removal tools.

    20190908_091048.jpg

    This is Milwaukee m18 flex fuel it goes to 750 ft lbs. 100 beyond the 650 alcoa says u need on the nuts.

    20190908_091549.jpg

    However many times im working in quiet zones OR the rims were overtightened, see that ALL the time. Specify u want the tire guy to use a torque stick and get them right before they even roll be sure they carry one.

    This is the infamous X12 , above, your wife could loosten your nuts with this. That would be fun hu. Its 700 bucks and for me this is the choice.

    20190908_091654.jpg

    However Amazon now sells these there r 10 of them to choose, they r 60 bucks. Your mother in law could loosten yer nuts with this one!! HOWEVER buyer beware they r not all created equall. Billy handed me one in OK City it was very user unfriendly. Chad put another in my hands in KC, the one in the photo, it worked great. If u give me your email ill mail u the link. Gill wont teach me how to copy and paste a link I cant figure it out.

    For that money even if u only use it once or twice its worth its weight. IF u get the right one.

    Get the milwaukee and 60 doolar multiplier.

    If the rims r tightened too much for the gun use the multiplier to get them started and finish them off with the gun. Going forward the multiplier will be only nessessary with a torque wrench attatched JUST to check tightness, u just use the gun both on and off all u need, If the rims r tightened correctly.

    Zoom in on the last pic, got the socket for the inner duel bottom left. Both different not sizes.

    We dont need no stinking compressor and back breaking 1in gun with its obnoxious hose. The milwaukee and the multiplier. M&M thats the ticket laddies.

    Doug please post a photo and link for those bus stands u bought.
    Last edited by Joe Camper; 09-08-2019 at 11:45 AM.
    1990 Peterbuilt 377
    3406 B Caterpillar
    13 Speed Roadranger
    No Norgrens


    1 day on paper no machines

  6. #36
    Join Date
    Mar 2013
    Location
    Chicago
    Posts
    3,988

    Default

    IMG950824.jpg

    These r the mac daddy prevo stands. Low and wide. I know people who resemble that comment. Anything taller than a foot to start is too tall.

    Sunex

    Amazon. 100 doolars each. Shipped. Thank u Billy.

    Thats HUNGRY Billy.
    Last edited by Joe Camper; 09-08-2019 at 12:19 PM.
    1990 Peterbuilt 377
    3406 B Caterpillar
    13 Speed Roadranger
    No Norgrens


    1 day on paper no machines

  7. #37
    Join Date
    Mar 2013
    Location
    Chicago
    Posts
    3,988

    Default

    Another COOL TOOL

    Guess what these r?

    This is a ingenious gadget.

    20191116_112244.jpg

    And Dan, no they r not sexual aids.
    Last edited by Joe Camper; 11-16-2019 at 01:33 PM.
    1990 Peterbuilt 377
    3406 B Caterpillar
    13 Speed Roadranger
    No Norgrens


    1 day on paper no machines

  8. #38
    Join Date
    Nov 2018
    Location
    Dixon
    Posts
    32

    Default

    I haven't been around POG long enough to know who Dan is. Lot's of characters I hope to meet someday. I'd use them for inserting wire in split loom.

    Joe and Michelle
    98 Country Coach XLV

  9. #39
    Join Date
    Mar 2013
    Location
    Chicago
    Posts
    3,988

    Default

    Would u be interested in demonstrating for us Joe??

    Dan has been around for almost as long as dirt. When u caravan with him u have to put the bus in the rocking chair cause if u give him the front door hill run off and leave everybody. He has twice the energy of those half his age.
    Last edited by Joe Camper; 11-16-2019 at 03:53 PM.
    1990 Peterbuilt 377
    3406 B Caterpillar
    13 Speed Roadranger
    No Norgrens


    1 day on paper no machines

  10. #40
    Join Date
    Mar 2013
    Location
    Chicago
    Posts
    3,988

    Default

    IMG_1434.jpg

    Anyone have any experience with these.

    Heat shrink center ring is low temp solder 2 yellow rings create a watertight connetion. One step process.

    Look interesting as of yet never used one.
    1990 Peterbuilt 377
    3406 B Caterpillar
    13 Speed Roadranger
    No Norgrens


    1 day on paper no machines

Similar Threads

  1. Pretty Cool Looking Silver Eagle
    By GDeen in forum Ah, Nice Coach...
    Replies: 5
    Last Post: 04-26-2009, 01:10 PM
  2. Cool NASA pictures
    By jello_jeep in forum MISCELLANEOUS ITEMS
    Replies: 0
    Last Post: 03-27-2008, 09:57 AM
  3. Tools...You Say?
    By Just Plain Jeff in forum Busted Knuckles and Greasy Jeans
    Replies: 14
    Last Post: 02-26-2008, 08:21 PM
  4. Why Men NEED Tools!
    By Just Plain Jeff in forum MISCELLANEOUS ITEMS
    Replies: 4
    Last Post: 06-08-2007, 02:32 PM
  5. Cool link
    By jello_jeep in forum MISCELLANEOUS ITEMS
    Replies: 5
    Last Post: 04-01-2007, 10:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •