Page 4 of 4 FirstFirst ... 234
Results 31 to 34 of 34

Thread: Steer Axle Bushings

  1. #31
    Joe Cannarozzi Guest

    Default

    Here is the replacement. A block of wood and some W-D and presto.

    my bus 106.jpg

    my bus 107.jpg

    I have found hub seal on this corner leaking. Good grief. It started just sitting here because I am sure it was not on the last trip. I had a drive hub leaking when we got it but this is the first tag/steer hub that has failed for us.
    Last edited by Joe Cannarozzi; 04-18-2009 at 10:46 AM.

  2. #32
    Join Date
    May 2008
    Location
    Boerne, Texas
    Posts
    401

    Default

    Joe, thank you. Your pictures are appreciated.

  3. #33
    Join Date
    May 2007
    Location
    Port St. Lucie, FL
    Posts
    1,745

    Default

    Great pictures Joe, and nice to have a narrative to go along.

    Looks like you're keeping plenty busy!

  4. #34
    Join Date
    Mar 2013
    Location
    Chicago
    Posts
    3,988

    Default

    Here r some changes ive uncovered on a 2012, a chassis I'm currently under but not normally with a chassis so young.

    20170916_111359.jpg

    I was going to try to trick someone with this picture but I'll cut to the chase.

    It looks like an upper a arm bushing and it very easily could be, but it isint.

    It is a pic of a radius rod bushing on the tag axle on this 2012 and that Bush looks like the bushes they used in the upper arms when ifs first came out, also another part that has gone through 3 or 4 improvement or changes between then and now. I know of 4 different upper arms over the run with ifs.

    The drive axle still sports the radius rods with the older style rubber donuts.

    Lewpop lives on forever.
    Last edited by Joe Camper; 09-16-2017 at 12:25 PM.
    1990 Peterbuilt 377
    3406 B Caterpillar
    13 Speed Roadranger
    No Norgrens


    1 day on paper no machines

Similar Threads

  1. Sway Bar Bushings
    By dale farley in forum Busted Knuckles and Greasy Jeans
    Replies: 55
    Last Post: 06-24-2010, 07:05 PM
  2. Steer and Tag Axle: Lubrication Thinky
    By Jim_Scoggins in forum Engines, transmissions, axles and wheels
    Replies: 6
    Last Post: 05-28-2008, 07:23 AM
  3. A Arm Bushings Needed
    By jimshoen in forum Busted Knuckles and Greasy Jeans
    Replies: 4
    Last Post: 03-09-2007, 11:19 AM
  4. Shock Bushings
    By Jon Wehrenberg in forum Busted Knuckles and Greasy Jeans
    Replies: 3
    Last Post: 08-31-2006, 04:12 PM
  5. Howard Center Steer
    By Just Plain Jeff in forum Engines, transmissions, axles and wheels
    Replies: 7
    Last Post: 02-27-2006, 08:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •