Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: PLASTIC,,,,,,a,,, PLASTIC SHIELD??

  1. #1
    Join Date
    Jun 2006
    Location
    Indian Hills
    Posts
    1,136

    Default PLASTIC,,,,,,a,,, PLASTIC SHIELD??

    I know we will take some heat, and maybe hit by orange sheep from another thread, but we are in need of, in search of a plastic bug shield for our new coach. It had one, but was lost before we picked her up.
    Anyone have a shield tucked away in the barn that would fit an XL?? Who is going to OKC.

    We are now on our 4th bus. We have done it all, an XL 45, XLII 45, an H3-45 and now a 40 XL
    Give us a call. 303-907-4746
    Jim and Chris
    2001 Featherlite Vogue XLV 2 slide with Rivets-current coach, 1999 shell
    Previous 22 years,
    We have owned every kind of Prevost shell but an H3-40

  2. #2
    Join Date
    Mar 2006
    Location
    ON THE ROAD IN THE SOUTH
    Posts
    2,825

    Default

    Jim, Capt Mogul I think knows where to have them made.

    JIM

  3. #3
    Join Date
    Jan 2006
    Location
    anytown
    Posts
    8,908

    Default

    You gotta be kidding.........What's next? Plastic on the sofa and chairs?

    Do you really want a bus that looks like a CC?

  4. #4
    Join Date
    Jan 2006
    Location
    Jasper
    Posts
    3,775

    Default

    Jim & Chris,

    Don't pay any attention to A-1, the front of his bus looks like he was an innocent bystander at a skeet shoot attended by Mango. If you can't find a shield, think about a bra. I use mine on every trip and it has saved the day a few times following trucks.

  5. #5
    Join Date
    May 2006
    Location
    LaBelle
    Posts
    474

    Default Plastic Shield

    Jim,

    If you can't find a used shield try Summit Products at 800-329-2958. They can make a new one for you.

  6. #6
    Join Date
    Nov 2006
    Location
    Sugar Land, TX
    Posts
    1,307

    Default

    Jim here is there website too, http://summit-products.com/

    See you guys in OKC

  7. #7
    Join Date
    Jun 2006
    Location
    Indian Hills
    Posts
    1,136

    Default

    Thanks Gary and Denny.

    I just talked to Albert at Summit-products and we can have a shield with a piano hinge for ease of cleaning for 1800 bucks going to them.

    Now, to find the time.
    Jim and Chris
    2001 Featherlite Vogue XLV 2 slide with Rivets-current coach, 1999 shell
    Previous 22 years,
    We have owned every kind of Prevost shell but an H3-40

  8. #8
    Join Date
    Jan 2006
    Location
    Nichols Hills
    Posts
    2,465

    Default

    You're screwed. I see sheep draped in bubble wrap in your future.

    And you will have to do the "Plastic Shield Walk of Shame" that I believe is scheduled for the night of the big steak dinner.

    I'm sure you will now move to the front of the line.

  9. #9
    Join Date
    Apr 2006
    Location
    Lake Forest
    Posts
    2,486

    Default

    You might also check with Steve Bennett. He had one made for his coach recently. Looks nicer than most I've seen. I'm not sure who he used.

  10. #10
    Join Date
    Jun 2006
    Location
    Indian Hills
    Posts
    1,136

    Default

    Thanks Ray,

    We will be heading to Steve's place day after tomorrow, 19th with Lily. We will spend the night at Mira Loma, spruce up the coach from our trip down, and off to Costa Mesa Monday the 21st. I am taking the coach in for some routine service this morning. Found out from a local Thompson coach owner, Brian White, that Arrow Stages does outside maintenance beyond their own at a good price.
    Then, sometime next week, I will pick up some 40 weight oil for the new coach and go back to Arrow. The dealer we bought the new coach (ZORRO), didn't listen to me, and put Shell Rotella T 15W 40 in the 8V-92, At least they DID put Tran Synd for fluid in the tranny as asked, but didn't top it off. It was a gallon low.
    After playing with the ocach more and loading it up, we have discovered the 15W Power Tech genset may need a new injection pump. There are seeps around the compression fittings, and tightening them was no help. It is very hard starting, and you can hear the relay feeding power to the glowpugs, but they may not be working either. Appears the genset has never been touched other than changing oil. I disturbed the paint on the connections, trying to tighten. It only has 757 hours on a genset from 1992.
    Jim and Chris
    2001 Featherlite Vogue XLV 2 slide with Rivets-current coach, 1999 shell
    Previous 22 years,
    We have owned every kind of Prevost shell but an H3-40

Similar Threads

  1. Plastic Shield for sale
    By edmartine in forum PARTS AND PIECES FOR SALE OR TRADE
    Replies: 19
    Last Post: 05-08-2010, 07:13 AM
  2. Re: Lexan/Plastic shield vs 3M Mask
    By Alek&Lucia in forum Country Coach
    Replies: 4
    Last Post: 11-15-2009, 08:09 PM
  3. need plastic window gear for 03 XLll
    By paulg in forum WANT/NEED PARTS?
    Replies: 3
    Last Post: 01-05-2009, 09:03 PM
  4. Recirculation shield
    By jelmore in forum Busted Knuckles and Greasy Jeans
    Replies: 3
    Last Post: 08-12-2008, 05:02 PM
  5. To Bus Armor, or Diamond Shield??
    By jello_jeep in forum Busted Knuckles and Greasy Jeans
    Replies: 5
    Last Post: 02-22-2007, 12:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •