Results 1 to 10 of 10

Thread: Members Helping Members

Hybrid View

  1. #1
    Join Date
    Jan 2006
    Location
    Jasper
    Posts
    3,775

    Default Members Helping Members

    I finally got my touch-up paint samples ordered through Guaranty in Junction City, OR with the help of Brian and Peter. They won't ship even little bottles of paint, as they're considered "hazardous".

    So after many phone calls made by Brain to Guaranty, he finally got someone to take them to the airport. Then Peter swoops in there with his 210, picks up the samples, takes them to Brain who delivers the paint to yours truly here at Spearfish.

    This is what POG is all about, members helping members..

    A big thanks to Brian and Peter.
    Last edited by truk4u; 09-16-2008 at 10:01 PM.

  2. #2
    Join Date
    Jan 2006
    Location
    Alexandria
    Posts
    2,161

    Default

    Quote Originally Posted by truk4u View Post

    A big thanks to Brain and Peter.
    I don't know who Brain is, but I'm sure he's sharp.

    mm

  3. #3
    Join Date
    Jan 2006
    Location
    Nichols Hills
    Posts
    2,465

    Default

    Mike,

    I don't understand this. We know Tom has an inflatable sheep need and we help him every time we can. But do we get any accolades? Noooo.

    And between us we have flown well over 5000 miles to help him out and nary a word.

    I think my feelings are hurt.......

  4. #4
    Join Date
    Feb 2008
    Posts
    61

    Default Amen to that

    Members helping members only begins to describe the value of POG. At the Spearfish Rally I made mention that one of my drive tires was flat. In a matter of a minute I had over half of the group heading toward my bus with tools in hand.
    What another great example of fellow members jumping in to offer their help and expertise. A special thanks to dalej, A-1 and truk for head manning the operation.
    Apparently the tire (inside drive axle) went down on the road and eventually took out the side wall. This was caused by a valve stem seal leak. I was suspicious of a slow leak and thought it may have been the valve stem extensions. After taking the valve stem extension off and throwing them in the trash, I found the tire to hold pressure for the next 3-4 weeks and around 1200 miles of travel with no problems. Before leaving to Spearfish I checked the tire pressures and added 5 lbs. this tire.
    I suspect that while airing up and checking the tire pressure, the force against the valve stem was enough to move the stem in an unfavorable position to cause it to start leaking again. A 99 cent spray bottle with some soapy water would have been enough to do a quick leak test and saved alot of time and cash not to mention what could have happened if the tire flew apart or started on fire.
    There is no guarantee that when outfitting your bus with a new set of Michelins that the tire center will replace your valve stems with a new shinny set so be sure you look to see that they do. Also sometimes tire shops and roadside tire experts tend to tighten your lug nuts a million ft. lbs. of torque making it impossible to remove them, especially out in the field. For this a tool was made available to me by Jon W. It is called a 12X multiplier and reduces the amount of applied torque by 12 times. I was told that if you mention that you are a POG member, you can get a discount on the cost of a new one.

    http://www.times12.com/wrench.htm

    I will be ordering one today along with a new tire. Thanks again to everyone who has taken the time to contribute the experience and knowledge they have gained over the years of being in this fun sport.

  5. #5
    dalej Guest

    Default

    Terry, glad to see you two made it home. I was thinking of calling you yesterday to see what the pressure was the next morning, but I was scared to.

  6. #6
    Join Date
    Feb 2008
    Posts
    61

    Default

    Air tight and out of sight....

Similar Threads

  1. New Members
    By dalej in forum MISCELLANEOUS ITEMS
    Replies: 5
    Last Post: 04-28-2009, 08:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •