Led Tail Lights

[Jon Wehrenberg]

Harry, Bruce has a 1999 and it has 12V lighting, including the tailights.

[0533]

One more time. Dalej is a POG member, IBP is not. Dale can supply every part you need including the SS tail light housings. The LED's are 12V your existing tail and clearance lights are 24V. It requires a new set of relays and diods for each circuit. It is not a complicated system to install once you have the parts and good installation advice. Dale J is the man.

Thanks Harry, I will ask Dale J.

Bruce

[0533]

Harry, Bruce has a 1999 and it has 12V lighting, including the tailights.

Hello Jon, I have a call into the factory to see what they have to say about this, but I am certain that they will quote some big number. Do you think that it is reasonable to do this myself?, considering my overall skill level. I have two of everything in my many tool bags, even inherited a complete tool box, real fancy one from the first owner (he left everything behind) but I still need the skill to go with it. I need to go to U of POG. for a owners course. Need an instruction book, lots of pictures, big print, and a speed dial hotline to each POG member who really knows the ropes.

Thanks, Jon for your help.

[Ray Davis]

Here's Dale's site, with a pretty good photo gallery How-To.

http://midwestleds.com/lights

Ray

[Jon Wehrenberg]

Bruce,

Lighting is plug and play. If you can get the lights that are direct replacement there is no magic. If you need a custom housing there are folks here that have gone various routes and they can tell you specifically where they bought the housings.

Check to be sure a switch to LEDs will not affect any other systems. There was some discussion about earlier set ups affecting the cruise control for example.

I think if you have to change housings the hardest part will be drilling and reinstalling pop rivets. I think the guys that switched lights have posted their experience. I don't think anybody had any serious problems.

[MangoMike]

Bruce,

Here's some info on LED clearance lights over at Prevoman.

ledlights.jpg

http://www.prevoman.com/Pages/Pictures/page2.html

Mike

[0533]

Bruce,

Here's some info on LED clearance lights over at Prevoman.

ledlights.jpg

http://www.prevoman.com/Pages/Pictures/page2.html

Mike

Thanks Mike,

Those look great. I will take a long look at mine when I get out to the factory. When I catch up with you folks in April at the TN rally we can get this underway.

Bruce

[0533]

Bruce,

Lighting is plug and play. If you can get the lights that are direct replacement there is no magic. If you need a custom housing there are folks here that have gone various routes and they can tell you specifically where they bought the housings.

Check to be sure a switch to LEDs will not affect any other systems. There was some discussion about earlier set ups affecting the cruise control for example.

I think if you have to change housings the hardest part will be drilling and reinstalling pop rivets. I think the guys that switched lights have posted their experience. I don't think anybody had any serious problems.

This may well work. my concern and hope is not to have to change out the housing, smaller would be a real problem as I just had the coach repainted. I am always surprised by the factory. They changed out all of the side lights when they repainted, and did this on their own, but never mentioned the idea of changing out the tail lights. My fault, but maybe it won't matter anyway.

[0533]

Here's Dale's site, with a pretty good photo gallery How-To.

http://midwestleds.com/lights

Ray

Thanks Ray, lots of help, can't miss with this type of help.

Bruce

[truk4u]

Bruce,

Stay on the dark side, the force will be with you!