-
24v LED T10 wedge base greater than 100 lumens
Question for the brain trust. I am hunting a 24v LED T10 wedge base lamp greater than 150 lumens that must be smaller than 3/4 diameter. I have searched a good part of the day for this elusive lamp and reaching out to see if any of you have a wonderful source to refer me too. References appreciated.
Tony and Jenny Conder
Abilene, Texas
- - - - - - - - - - -
2008 Marathon D/S XLII
2017 RAM 1500 4x4
-
Tony,
As an alternative, unless the tube is not behind a diffused cover, would be to install LED strip lights in the housing. You could also change them to 12V. Worse case would be to add a relay at the Allen-Bradley system. Best case would be to just change the A-B input to that circuit to 12V.
Gil and Durlene
2003 H-3 Hoffman Conversion
-
Thanks Gil, those are definitely options for someone going through this same process. I was fortunate to find a lamp that would work at marinebeam.com . It was somewhat elusive, and more expensive that I hoped but it will be a huge upgrade from my current lighting. See you soon. Tony
Tony and Jenny Conder
Abilene, Texas
- - - - - - - - - - -
2008 Marathon D/S XLII
2017 RAM 1500 4x4
-
Tony,
It's always rewarding to find that elusive part!
See ya next month,
Gil and Durlene
2003 H-3 Hoffman Conversion
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules