Hissing sound

[truk4u]

Tuga,

Here's a shot in the dark... Does the Newell have an air operated throttle and if so, could it be coming from the pedal.

[merle&louise]

Tom,

I have the same throttle as Roger, which I believe is not air operated but it has a sensor under the accelerator pedal. I used to get an error message "TPS failure low" and I talked to Roger to get a part number from him. I haven't gotten the error message ever since I disconnected the electric connection under the accelerator and plugged it back in. Go figure!

Debi,

I think that you nailed it; the muffler is shot. This would explain why you heard a roaring/hissing sound when we were in front of you and Bob climbing hills on the way to Kerrville.

Is Bob-03 a lucky guy or what; he not only has a beautiful wife, but she is a great diesel mechanic. Some guys have all the luck. Move over Jon!


Larry W,

Welecome to the forum, and yes I did think to check the backup camera volume.


Jim,

I'm going to hold off on a Liberty for a while (until Jon puts his up for sale)

Last oil change I used Diet Coke (it's cheaper than Mobil Delvac 1) instead of Snake Oil. I heard that it is better for a series 60; at least that's what Lew told me.

Thanks for all of the help guys (you too Debi).

[rmboies]

[
Thanks for all of the help guys (you too Debi). [/QUOTE]

Glad to be of service Tuga, now where did I put those coveralls??

[JIM CHALOUPKA]

[
Thanks for all of the help guys (you too Debi).

Glad to be of service Tuga, now where did I put those coveralls??[/QUOTE]




Debi, I think Bob 03 said the coveralls are out in the barn (a new never opened package )

[rmboies]

[QUOTE=JIM CHALOUPKA;
Debi, I think Bob 03 said the coveralls are out in the barn (a new never opened package ) [/QUOTE]


ok, who keeps letting Jim out of his room?? I swear, everytime I lock him in there he comes out to harass me again

[JIM CHALOUPKA]

Deb, Only well liked people get teased.

[merle&louise]

Muffler changed; hissing sound is GONE

Thanks for all of the advice.

[Danss]

My Generator cranks easy and runs for One minute and ten seconds then shuts down. It will then crank up and do the same thing. Any Ideas? Thanks, Dan

[truk4u]

Danss,

Check your auto-start setting and disable to eliminate that. Also, if you have the programmable quiet time built in to the inverter setup, you may be in the quiet time parameters. I had a CC with Xantrex Inverters and it would do exactly as you said if trying to manually start during the quiet time period.