Yes I did. After a follow up call with PASS this am they told me the same thing you did. I'm going to take a look at the dash controller this afternoon to see what voltage is coming out of it. Regarding the defrost air continuously blowing air, there is an access door "detail E" on the defroster installation page Y2-2230-00 of the parts manual that opens and closes via an actuator that over time will become detached from the actuator pin. To access from the top requires removal of the majority of trim on the drivers and passengers side. It would require alot of unplugging and replugging of a ton of connections. The alternative method is to remove the front right panel that contains the back up camera and A/C switches. That exposes the actuator and sliding door. They said to start by drilling a quarter size hole above the motor where you should see the dedicated allen screw that may be loose or gone. Then patch the hole. I'm going to start there and see if I can fix the problem.