Results 1 to 3 of 3

Thread: norgren for tag lift

  1. #1
    Join Date
    Feb 2018
    Location
    conifer
    Posts
    134

    Default norgren for tag lift

    Although I realize lifting tag is rare, I may need to do so to get more traction in snow. The airbags exhaust when engaging lift tag lever, but no air going to the lift chambers. The shafts have been cleaned and are free. Can anyone tell me the location of the norgren that sends pressure to these chambers. I tried to follow lines but are buried somewhere.

  2. #2
    Join Date
    Nov 2018
    Location
    PIEDMONT
    Posts
    462

    Default

    John mine is in the area above tag wheel on driver's side. Replaced with a Prevost supplied Burkett valve when we did the "Tag axle logic improvement kit" that prevents tag from dumping when AUX air bleeds off.

    Billy & Lisa Gaines
    1996 Marathon XL40

  3. #3
    Join Date
    Jul 2020
    Location
    Simi Valley
    Posts
    870

    Default

    My Tag valve is in the same spot as Billy's and was the hardest to access of all my valves. Remove the tag and drive wheels on that side, and sit on some blocks to get you as high as possible.I also had to replace the airlines that went to this valve as they were very stiff and nearly impossible to work with.
    Mike Giboney
    1992 Prevost Country Coach
    #60187

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •