I am a big DIY person. It has been fun gathering 'big tools' for my bus. I have entered a whole new world of 1/2" drive sockets (or bigger), heavy jacks, supports, big tires etc.
Hopefully Joe Camper approves of my new tool toys.
IMG_3537.jpg
I am a big DIY person. It has been fun gathering 'big tools' for my bus. I have entered a whole new world of 1/2" drive sockets (or bigger), heavy jacks, supports, big tires etc.
Hopefully Joe Camper approves of my new tool toys.
IMG_3537.jpg
The lathe and vertical mill would go nicely in my garage. Do u have any old vices u don't use? I'm also interested in buying a large anvil if anybody has a lead on 1.
1990 Peterbuilt 377
3406 B Caterpillar
13 Speed Roadranger
No Norgrens
1 day on paper no machines
Joe, I don't have a spare vise. The one you see on the left side of the picture was one I purchased. Found it almost new at a plant surplus sale. Big heavy american made vise for $100. It was a good find!
I hope in the next year you get to see the lathe and mill in person. I want to have you go through my 95 chassis sometime in 2021.
What are the orange plates with yellow rope handles for?
Mike Giboney
1992 Prevost Country Coach
#60187
The go under the jack stands if you are on soft ground. If i were to buy again, I would get the 18" x 18" instead of the 12x12.
I have used on concrete as well under the jacks to provide a little extra height. Grabbing the handle to pull the jacks out also is helpful.
They also make great cutting boards! LOL.
4 pack from BIGFOOT purchased off amazon.
ok Got it, Thank you
Mike Giboney
1992 Prevost Country Coach
#60187