Take them off the bus and 1 at a time soap them up??? I'll be making my annual November pass through Texas again Reese if u don't figure it out we will get to the bottom.of it then.
Take them off the bus and 1 at a time soap them up??? I'll be making my annual November pass through Texas again Reese if u don't figure it out we will get to the bottom.of it then.
1990 Peterbuilt 377
3406 B Caterpillar
13 Speed Roadranger
No Norgrens
1 day on paper no machines
Joe and Gil,
Thank you for your responses. This situation has become frustrating.
Reese
Just caught the fact tires were installed at the same time. Take the sensors off and see if you still lose air. This will tell you if it's the wheel/tire or valve stem/sensor.
Gil and Durlene
2003 H-3 Hoffman Conversion
Reese if u pull the sensors and they still leak............
I have a local tire shop that still uses the big round galvanized pool they put mounted tires underwater in to find leaks. They have a hydraulic ram with fingers that push it under and hold it. I bet there r also local tire shops in your neighborhood who have them. Call around find a place and put the tires in the dip tank u will for sure get to the bottom of it.
Last edited by Joe Camper; 08-05-2020 at 06:25 PM.
1990 Peterbuilt 377
3406 B Caterpillar
13 Speed Roadranger
No Norgrens
1 day on paper no machines
Great advice! Love seeing the help that is so readily and knowledgeably offered...with nothing but the intent to help! The rest of society could stand to learn from the examples provided in this forum and community. Can’t wait until we have our coach (heading out this weekend to make selection from several)!
Greg & Deb
WinterStorm
This will not be your problem since one of them is the outside dual. However, my inside drives are steel wheels and the tire shop that Fort Worth Prevost called showed them that it was actually the old wheels that were leaking.
Mark and Debbie Fratto
1998 Parliament
Reece,
Remove the sensors and then see what you have. I’m repeating myself from the other side, but for those not familiar with Pressure Pro, the only sensor leaks I’ve had in many years was with 2 sensors that I checked myself and found a leak at the seams. These caused a very slow leak and I replaced under warranty. The one with the underside leak was hard to find.
AF1E595E-70C7-4E7E-9490-2F714879C101.jpegFD2C3266-0048-4DC1-83D8-C732CABE3CFF.jpeg
All,
Thanks to everybody for their responses to the loss of air question. It is appreciated.
Reese
2007 Marathon XLII
Fratto,
Which tire shop did Ft. Worth Prevost refer you to? I will probably need to contact them. Thank you for your reply.
Reese
2007 Marathon XLII #1025