Printable View
I am looking at ordering the X-12 wrench that I have read so much about. As I see things, most maintenance will happen "under the rig". Taking off a tire or tires would greatly increase access. The price at TIA Website, http://www.times12.com/wrench.htm, is $619.00.
First, where is the cheapest place to buy one?
Secondly, the wrench comes with a 1 X 1 1/2" socket and 13/16" adapter for the square nut. Is this the correct size for the Prevost lug nuts?
Any comments are appreciated.
Hector
Hector, I really think that someone that is going to do repairs on a regular basis, needs a 1 inch air impact. It will greatly improve the way you look at repairs. That multiplier is great for breaking the nuts on the road or if you have a 1/2 inch impact , getting the nuts broke loose and then use the 1/2 inch for the rest. I only bought a 1 inch impact a year ago and it is one of those things that after you buy it you wonder why you waited.
I bought mine at the Chinese Capitol of the World...Harbor Frieght, it works great.
Hector, If you have a fixed base, a good air supply (1/2 inch hose and at least 60 gallon tank) it will be cheaper to buy an impact wrench and a whole lot easier to use. Dale is on the money with his suggestions.
However, if you do not have a fixed base and you contemplate changing your own tires on the road also, then the X-12 is the real deal with the size wrenches listed.
If you can wait until Sevierville, I have one for you to look at and play with before you make a decision. Do not rule out a large wrench with a 4' extension for practicality. Our torque values are around 500 so that is another option. There are other things I would buy now before I would buy the X-12.
Hector,
Some more pixs and purchase info over at the Cool Bus Tools™ at Prevoman.com
http://www.prevoman.com/Pages/Cool%20Toos/ToolsPg1.html
Dale,
For those of us that Santa forgot can you post the model # and price of the impact that you did purchase.
mm
Mike, this is the one Roger has...http://www.harborfreight.com/cpi/cta...emnumber=94108 This is the cheapest I have seen it.
If you print this out and take it to a Harbor Freight store, they honor it.
This is the one I have http://www.harborfreight.com/cpi/cta...emnumber=94109
Roger says his works just fine, I wanted the twin hammer since it was only $20 more, no reason.
They have one that is only $89.99 check out this page. http://search.harborfreight.com/cpis...=1+inch+impact
Remember to print out the page before you go to the store.
Hector, the 1 1/2" socket would be the one you would use. I don't think 1 1/2" is the exact size but it works fine and my SAE sockets don't have anything else that fits. It may be a 38MM since the 1 1/2" is a little large but since I'm cheap I don't plan on buying 1" metric impacts.
As cool as the X-12 is, a 4 ft. piece of 2" pipe will do the job just as well and I'm not so sure that you might not mar up a wheel with the X-12. Like Mike says, break um loose and use a good 1/2" impact to do the work.
If you buy a 1" impact from a Harbor Freight store, you will have to get 1/2" air hose somewhere else. They have 1/2" online but not in their retail stores.
Mike, I got this one on sale for about a hundred bucks. Works fine but the darn thing will work your tush off it's so heavy. Wish I had bought one twenty years ago.
http://www.harborfreight.com/cpi/cta...emnumber=94109
Ted, I think it is 1 and 1/2 inch. I have always used that socket and bought lug nut covers that size.
I waited until I seen these http://www.harborfreight.com/cpi/cta...temnumber=2522 at 49 until I bought them, like they are now.
Hector, For tool purchasing decisions I generally try to determine if I will use the tool often enough to justify the dollars spent and the room it takes up. I also try to determine if I do not get the tool how will that affect me.
I have used my 1" impact wrench, and my X12 often enough now to have formed some opinions on both. I originally used only the X12. I used it in lieu of the impact wrench. It is hard work to use it, but one advantage is it works well with a 1/2" torque wrench to set the wheel nut torques accurately.
The 1" impact wrench is much easier to use. It is heavier, requires 1/2" air hose, but it is fast and efficient. I have learned from experience and using the X12 and a torque wrench how much and how to use the impact wrench to get the correct torque. Now the X12 sits in a box rarely used.
Before I invested in the X12 I would want good sets of Gearwrench wrenches and screwdrivers. I would want a clamp on Fluke 336A meter. A Fluke 117 meter. I would want a good set of hydraulic jacks, air over hydraulic. I would want good hand tools for the bus tool box. You see where I am heading. The things I named would be used far more frequently. And I believe I could almost buy them all with the price reduction between the X12 and the $99 Harbor Freight impact wrench.
Right now the X12 is only peace of mind. I bring it with me so I can change my own tires on the road and do not have to rely on anybody. There is some value there of course, but I have also never had an on road flat.
The Chinese had to copy this impact wrench from an American. There just ain't no Chinaman man enough to handle it. We are talking a "man" tool here.:cool:
Jon Said:
"I would want a clamp on Fluke 336A meter. A Fluke 117 meter."
Jon, I have gotten by for years with a $30 voltmeter from Grainger. I am interested in upgrading both my equipment and my knowledge using the meters you recommend. How about doing a seminar at Sevierville on the basic use of this equipment?
Not a chance Ted. The man that is the absolute expert on this area is Nick Hessler. He is an advertiser, he has done seminars at our rallies and he is the master on things that have little electrons running around in them.
I couldn't hold an LED to him.
"I couldn't hold an LED to him."
Yea, right. Won't fly. And, we all know you don't like LEDs so that's a lame excuse. So, any chance of Brother Hessler showing up come April? I hate to buy all this high $ equipment and not be able to use it and I quit reading instructions years ago when the people that write them have English as a third language.
He's scheduled to be there Ted
Thanks, Jim. We'll just settle for second best.:rolleyes:
After looking over the responses, I think the best approach for me is the X-12, at least for the shout term. So, I called TIA Products to discuss the purchase and asked if their company offered discounts to groups. I explained that I was new member of the Prevost Owners Group and the group membership were individuals that were interested in preforming their own maintenance. And that members were owners of Prevost Motor Coaches, which all had wheels that the X-12 was designed to remove. After chatting with Mr. Bob Mull, owner of the company, he stated that his company would offer a $99.00 discount to members of the Prevost Owners Group for purchase of the X-12. His website states a price of $619.00, so with the discount applied, the adjusted price is $520.00. He stated that when the order is made, the purchaser should identify himself as a Prevost Owners Group Member and remind the rep taking the order of the discount. Bob resides in Asheville, NC (A very nice man to chat with on the phone.) and is available for X-12 issues or questions at his cell #828-242-7992. His website is http://www.times12.com/wrench.htm.
I am not sure of the website protocol, but would this qualify as a sponsored link on the Prevost Owners Group website. It does represent a savings for members.
Thanks again,
Hector
Good job Hector. Attaboy is definitely in order here.
After looking over the China offering from Harbor Freight, I have decided to go for the 1 inch impact. It seems like the "manly thing" to do.
As stated, for the same dollar I would spend on the X-12 wrench, I could buy an impact, plus more toy tools.
Thanks for the feedback. Newbies need guidance.
Hector
Hector I own one and have gotten great performance out of it for over 10 years now. If you up the hose diameter and turn up the compressor limit to it's max 145lbs. you can run one off a compressor like this.
Attachment 2240
Also I have also learned that any of the "Pittsburgh Forge" wrenches and hand tools in the Harbor Freight catalog to be of S/K or Craftsman quality. The prices are so cheep one is reluctant to purchase any at first but they are a great buy.