Printable View
The b&w backup monitor in my dash is a "Intec cvm600". Has anyone found a replacement for this monitor? Or possibly replaced the camera and monitor and reused the existing cable? I believe my monitor and/or camera are going bad and will need to be replaced in the near future. Any suggestions on the best and/or easiest way to replace them? I am having trouble wrapping my head around the cable requirements of the new systems I see on line vs. the cable I have now.
Andre,
Contact Tim at RV Cams. He has helped me sort out back up camera issues on both of our buses. http://www.rvcams.com/default.htm.
On our Royale we replaced the original monitor with a Kenwood DNX8120 radio/XM/GPS unit. It has an input for a back up camera complete with a reverse switch sensing wire. In our case I used the original camera and wired the reverse switch wire to a toggle switch going to a 12volt source. Works great.
Brian,
Thanks, it is now on the list of things to do.
Replaced my camera last year with one from RVCams.com
CH-Kit which is a Color Waterproof CCD Camera "CH-77LAN"
It was an easy replacement and works well.
As a side note, when I removed the original camera the lense was loose.
A little tightening may have been all I needed to do?