Please direct me to the previous post, maybe a year ago, where a member pulled the valve cover and checked the valve lash (Series 60) from inside the engine compartment.
Printable View
Please direct me to the previous post, maybe a year ago, where a member pulled the valve cover and checked the valve lash (Series 60) from inside the engine compartment.
Jim,
I remember that. Wasn't it a post by George?
http://forum.prevostownersgroup.com/...oked-at!/page9
Jim,
Just read you post on valve adjustment (working way to hard at my day job), it can be done with the engine compartment closing cover in place. Number 6 will test your grit.
Detroit Diesel can supply the injector height tool, you will need the serial number of your engine to get the right tool. If you have a Jake brake it may be more difficult if not impossible to make the adjustment with the closing cover in place.
I can send you angled feeler gages and the tools I made to do mine if you want to take a wack at it with them, it's going to be a long time before I need to use them again.