Thorough

[Joe Camper]

15568

When the rubber insert won't fit.

[truk4u]

Just when you think you’ve almost seen it all, whamo....

[Gil_J]

Check these TPMS sensor installations.
15569
This is a 365. There's a fabricated bracket that goes through the wheel to the backside of the wheel. I suppose it's there to overcome centrifugal force

15570
This is an outer dual. There's a flexible air hose between the valve stem and sensor. The sensor is held by the pressure of the hose where it's mounted in a valve stem rubber donut. It has to be a PITA to remove the hose.

[Joe Camper]

You win Gill uncle uncle what the heck you got going on there? Please explain what we're looking at

[Gil_J]

Joe, I updated the post to add some description.

[BadFitter]

Centramatic wheel balancers might be in order.

[Joe Camper]

I hear you on the centramatics. That Twisted stainless wire on this bus I'm working on that's growing on me I like that I might have to copy that change it just a little bit so I could take credit for it.

[Gil_J]

The wheels I pictured did have Centramatics. I'm pretty sure they were needed unless this extra hardware is installed prior to spin balancing.