Need Entrance Door Rub Rail

[dale farley]

One of our members has a Country Coach with a damaged rub rail. He needs some suggestions on where he can purchase a new one or have that one repaired. Its the rail by the entrance door about 30" long.

I am assuming any good metal shop could remove a dent and polish the stainless rub rail. I am pretty sure that Prevost has the new one, but I assume there are other sources also.

[tradewinds]

Dale we can get these - if you can get a picture of the rub rail to confirm style we can source it.

[Gil_J]

Dale,

Those SS rub rails didn't come from Prevost. IBP makes them and I'm sure that curved one is expensive. Unless it looks bad, he might just want to consider it patina. The other alternative is a junk yard.

[JIM KELLER]

Dale, Tell that Member to stand next to the Rub Rail and have someone take a picture so we can see both of them. These dings are like Trophies and all Members want to see the award !

[dale farley]

Jim,

I should have a picture of my same rail on my CC. I caught a white PVC fence with it the first day I got the bus home. Harry Hoppe was very good at removing those dents. He did a great job on the one at the rally in South Dakota.

[Gil_J]

Dale, what are you talking about? Your signature dent is still there ;-(

[dale farley]

Gil, I assumed you had painted over the dent so it wouldn't show.

[dale farley]

Terry sent a picture of the rail to Tradewinds, so hopefully they will be able to take care of the problem. If they can't then I would hope Tradewinds or one of the POG members knows of a metal shop that can beat out the dent and sand/buff it out. Terry appreciates everyone's help.