Many Items

[Joe Camper]

Where to start will sell as a bundle for discount and will post individual photos. Shipping not included

1251412515

[Joe Camper]

Additional "stuff"12516

[Joe Camper]

Here is radius rod bushings pins and brackets. maybe a dozen additional rubber bushings not in the photo

12517

[Joe Camper]

12518

Here is an M&G break system for 2013 ford 1/2 ton PU installed used once removed.

[Joe Camper]

No sensors with this.

12519

[Joe Camper]

1252012521

24 volt webasto with spare for parts

[Joe Camper]

12522

Fresh water tanks

[Joe Camper]

If there is anything on the list at the beginning of the thread ask and Ill put individual photos of the "stuff"

Like this for example

12523125241252512526

[Joe Camper]

Here is a used tested 12 volt control box for a webasto

1252712528

[Joe Camper]

125341252912530

This stuff could potentially lay around forever help me clean house

[garyde]

Hi Joe. The wheel dolly and the bus support stands . Let me know about shipping or someone heading toward California maybe.

[Joe Camper]

OK these things U ask for will be from 1 liberty owner to another. I went to Tennessee a week ago to see Eric and Debbie. SO here we are now. What r friends for right. I know what they weigh 50lb the stands that is I will stop by UPS Monday and let U know what they say. The fellow in Simi valley that bought Lewpops Marathon has sold it if U were hoping I could bring them this winter Im not coming out there this winter.

[Joe Camper]

12531

Here is a shot of the stands

[Joe Camper]

1253212533

Here is the brake buddy

[Joe Camper]

12535

Here is a nice pile make a good bundle

[Joe Camper]

1253712536

Gracy says Please buy my dads stuff so he can take me shopping for more clothes .:)

[pwf252]

Joe,
Couple questions on the M&G Brake system.

1. Put on used once removed - why?
2. How much?

[garyde]

OK Joe. Just email me; gary@deinhardelectric.com

[Joe Camper]

I was hoping and waiting for your question Pat. I put this on a 2013 Ford PU that was bran new. The installation required cutting the reservoir for the coolant and the washer fluid apart then moving the coolant 1/2 to another location under the hood.

Both John and I decided to remove it and put it back to original for what seemed to us was a couple of obvious reasons. First if anything anywhere in the general vicinity of that mod would go wrong during warrenty period on the PU that would not go well. After the install that was obvious. Also the new location for the overflow for that particular truck was up by the firewall tight to the underside of the hood on a bracket that holds it other than straight. M&G sent photos and it was in there just like the pics. Crooked,in a really bad place and ugly I might add.

I think M&G has a great product. I wanted to get one for my Ram PU but they do not fit those or at least they didn't then. If U R thinking about M&G I would suggest U have them send U a the photo they provide for installation before U purchase so U don't find out like we did that U will be under the hood doing things U may not want to be doing.

I ate the cost of the M&G and he bought a new duel reservoir we put it back. I dont remember what I Paid for it. I got a PM about that from another I need to call M&G. Inquire about a few things. Whoever wants this Id prefer sending it to U and after either U R confident U can install it or actually install it then send the doe. 1/3 of what it was new? I don't know make an offer.

[pwf252]

Joe,
i appreciate your direct and honest reply. I have a 2011 super crew now but was thinking of upgrading to a 4-wheel drive 2013 and rigging it to tow.
Using a M&G now on my Wrangler and like the set-up, might have to rethink utilizing a M&G on a Ford Truck though given your experience.

[Joe Camper]

Pat this was a 1/2 ton 4WD 2013 Ford. Maybe a 1 ton has more clearance. Have M&G pdf U a photo of the install so U can see if its the same.