PDA

View Full Version : 2 Different Norgrens



Joe Camper
10-22-2013, 09:28 PM
Both these valves came off the same bus they were on the left and right rear. The port sizes R different 1 is 3/8 openings the other is 1/2in. Same part #s on both of them. Never saw or knew of this. Anybody ever encounter this before. Very weird. The last picture is my "Norgren" vice it works very well.124331243412435

garyde
10-22-2013, 10:21 PM
Hi Joe. Does the 1/2 control more or is it in line before the 3/8 Norgren.

Joe Camper
10-23-2013, 07:20 AM
NO not at all. The replacements R all 1/2 in ports as R all Ive ever seen. The one I pulled off the drivers side with the 3/8ths ports required getting the fittings right to install the replacement. Now its happy.

Gil_J
10-23-2013, 08:57 AM
What a surprise to buy the exact part number only to find it's not a drop in replacement. Most of us would expect the part number to specify fit and function.

Yet another leasoned learned. Thanks for sharing.

jbchevy3
12-06-2013, 10:43 PM
Really like the vice Joe!

Just replaced leaking push n lock fittings in my Norgrens, they were all 3/8 pipe.

Joe Camper
12-07-2013, 10:10 AM
If some xl owners saw the location of the norgrens on your h they would be jealous. When u r soaping for leaks be sure to spray the entire body of the valve sometimes there will be a leak at the flange for the 2 ends. Also spray the short tail on the smaller 2 position that's its exhaust port and a potential leak point. On the h it is upstde down and the tail is pointing up and easy to do. Your work spot is world class gotta help a bit.