PDA

View Full Version : prosine inverter



pump7167
10-17-2012, 07:38 PM
i have two prosine 3.0/24 inverters one has gone out does anyone know of a repair station i could send it to thanks

bussphart
10-18-2012, 08:47 AM
I had a Trace Inverter (4.0/24) repaired by Field Technical Services in Houston a few months ago.
You might call to see if he can repair yours. Call Owen at 281-561-7149.
Good Luck

terryweber
10-19-2012, 09:21 PM
i have two prosine 3.0/24 inverters one has gone out does anyone know of a repair station i could send it to thanks

i have the same thing need my repaired cel 519 465 4101 terry

BenC
10-23-2012, 11:04 AM
To the best of my recollection, the Prosine inverters are not repairable. I have been told by Southeast Power, the place we send our inverters for repair, that the Stat-Power division of Xantrex does not sell repair boards for these inverters. If you hear otherwise, I would like the feedback. Thanks.

pump7167
10-30-2012, 04:33 PM
i found a company in mo that can repair certain parts on the prosine 3.0X24 inverter . i sent my unit in they gave an estimate of 550.00. in case anyone is looking its PCS electronics ph 573 814 3131 ask for robert

Gil_J
10-31-2012, 01:59 PM
Here's Xantrex's authorized repair facilities: http://www.xantrex.com/contacts/authorized-service-centers.aspx I recently used ASE Supply in Portland OR to repair a Freedom series. Based on what Southeast told Ben, you may be out of luck on repairs. It's certainly worth calling a repair center. FWIW, the repair centers sometimes have reburbished units or discounts on new units.

If replacement costs are too high, I'd suggest you consider replacing both Magnum units.

terryweber
11-22-2012, 10:02 AM
did they fix your prosine

pump7167
11-23-2012, 10:09 AM
As of now I have not gotten it back I will let you know how it plays out

StroupC
11-23-2012, 02:32 PM
We have spare Trace Inverters in stock with some parts. You can call Mike Bolf our Service Manager at 386.804.4490