Reprogramming keyless entry

[Ronald Hiemann]

The dealer gave me a code and it does not work. Next he told me how to program a new code. Does not work either. I do have tons of documentation but nothing about programming codes.
Now what?
Do I need to contact Prevost for this?
Any advice?
Thanks,
Ronald

[Mark3101]

Drop on over to Prevost Community and you can ask Prevost directly about this.

[Jamie Bradford]

Hi Ron,

I searched the Forum and found a few threads which may help you. Also , here is some other info I found. Perhaps this will help.

Jamie


http://forum.prevostownersgroup.com/showthread.php?1436-Problems-with-keyless-entry-pad&highlight=keyless
http://forum.prevostownersgroup.com/showthread.php?4198-Entry-Key-Pad-Questions&highlight=keyless
http://wiki.answers.com/Q/Keyless_Entry_Keypad_FAQ_Ford_Explorer

[tpr]

You can call Prevost in Canada with your vin number and they will give you the proper code. It is also stamped on the fuse panel as you come in the door , you might have to take off the upolstered panel to get to it.

[jack14r]

The code is on the inside of the door to the steering bay(the first door on the drivers side).Ron,do you have a Prevost operators manual,if not order one the part number for a 2006 and early 2007 shell is PA1527.Here are the steps to program your key less entry(1) enter the original code and within 5 seconds,press the 1/2 button,(2) within 5 seconds of pressing the 1/2 button enter your personal code each number must be entered within 5 seconds of the last,the keyboard light will turn off if you are successful.After the code is accepted you can lock the coach by pressing 7/8 and 9/0 at the same time,and you can unlock the bay doors after entering your code and then by pressing the 3/4 button within 5 seconds.