Headhunter Toilet Problem

[aggies09]

I have been experiencing toilet issues. I have replaced the solenoid. I have replaced the valve. That did not correct my issue. The toilet flushes non stop and will not cut off. I southern engineered the system with a manual switch that works like a champ. I ordered a new "timer" shown on this post, but the "timer" has more wires than my old "timer". The old timer had a positive, negative, and two wires that ran to the switch. The new timer has a positive, negative, two wires marked solonoid, and two wires marked switch. Not being an electrician and having no instructions, I have no idea what to connect to what in order to make this work like it is supposed to. I would be much appreciative for any guidance and feedback.

Thanks
Dazed and Confused
8670

[Jon Wehrenberg]

Dear Dazed and Confused:

I think you solved the problem. Leave the manual switch in place.

Signed,

Abby

[jack14r]

Headhunter changed the design around 2008 or 2009 you need the old switch which they still make.